1. Home
  2. Productos
  3. Ciberseguridad
  4. Equipo de aislamiento
  5. VCL-2702, 5052, 5054

VCL-2702, 5052, 5054

Network Isolation (Kill) Equipment

VCL provides a comprehensive “Beyond the Firewall” cyber security solutions that designed to assist organizations to prevent and secure their network against firewall breaches and cyber-attacks in real-time.

The Network Isolation (Kill) Equipment is one such element that forms a part of the cyber security suite of products that are offered by VCL.

Most network administrators rely solely on a “Firewall” to secure their IP networks. Some network administrators go one step further and also deploy an additional “Network Traffic Sniffer” which monitors and flags the transmitted and received data anomalies. However, very few network administrators actually plans for an eventuality after a “Firewall” has been breached and the “Network Traffic Sniffer” has recorded anomalies in the data that is being transmitted and received.

VCL-2702

VCL-5052

VCL-5054

The “Network Isolation (Kill) Equipment” provides the last-line- of-defence in the event of a network security breach. The “Network Isolation (Kill) Equipment” can be used in conjunction with a “Firewall”, “Network Traffic Sniffer” and multiple VCL- 2143 “Network-MouseTrαp(s)™ / Advanced Honeypot” to automatically initiate a series of defensive actions that would have been planned by the network administrator, in the event of a network security breach.

Such actions would include:

  • Disconnecting the Local Area Network (LAN) from the Wide AreaNetwork (WAN).
  • Disconnecting only a specific data storage device (SAN / NAS),or Server from the local network.
  • Generating“Audio-Visual Alarms”,
  • Sending“SNMPTraps”,
  • Sending“Network Security Alerts” to a centralized NMS,
  • Intrusion Detection Alarm
  • Power LED indication.


Features & Highlights

Fail-Safe. Never it self becomes a point of failure

  • The equipment maintains data connectivity if the port was put in the operational mode, even in power down condition or upon control card failure.
  • The network port shall continue to remain in isolated mode if the port was put in the isolation mode prior to power down or control card failure.

The Network Isolation (Kill) Equipment is available in three variants.

Single Port Network Isolation (Kill) Equipment,

  • 1U,19-InchRackMountsubstancechassis
  • May be used where only one port is required to be isolated from the network
  • Available with 1G Electrical (RJ45), 1G Optical (LC) and 10G(LC) Optical Interfaces

Quad Port Network Isolation (Kill) Equipment,

  • 2U,19-Inch Rack Mount substance chassis
  • May be used where up to four ports are required to be isolatedf rom the network
  • Available with 1G Optical (LC),10G (LC) Optical and 40G (LC) Optical Interfaces

“Network Isolation (Kill) Equipment” provides manual and automatic isolation of the Local Area Network from Wide Area Network, in an event of a network security breach / cyber-attack.

1 x Port Electrical (RJ45) Network Isolation Equipment: VCL2702

Number of Ethernet Ports 2

Interface Orientation: 

  • 1 x 1G Gigabit Ethernet Interface towards network
  • 1 x 1G Gigabit Ethernet Interface towards protected equipment Guaranteed Maximum Data Throughput 1000 Mbps on 1G Port Interface Types 10/100/1000 BaseT Electrical

1 x Port Optical (LC) Network Isolation Equipment: VCL-5052

Number of Ethernet Ports 2

Interface Orientation:

  • 1 x 1G / 10G Gigabit Ethernet Interface towards network 
  • 1 x 1G / 10G Gigabit Ethernet Interface towards protected equipment Guaranteed Maximum Data Throughput
  • 1000 Mbps on 1G Port 10,000 Mbps on the 10G Interface Interface Types
  • 1000Base-X Optical, 10GBASE-SR 10GBASE-LR, 10GBASE-ER 10GBase-LX4, 10GBase-WAN

4 x Port Network Isolation Equipment: VCL-5054

Number of Ethernet Ports:

  • 4+4 x 1G / 10G or 1+1 x 40G

Interfaces Interface Orientation:

  • Up to 4 x 1G/10G or 1 x 40G Gigabit Ethernet Interfaces towards network
  • Up to 4 x 1G/10G or 1 x 40G Gigabit Ethernet Interfaces towards protected equipment Interface Types
  • 1000Base-X Optical, 10GBASE-SR 10GBASE-LR, 10GBASE-ER 10GBase-LX4, 10GBase-WAN

VCL-2702-NKS VCL-2702, Network Isolation Equipment 19-Inch, Rack Mount Version Supports:

  • 1 x GigE IN (Electrical RJ45)
  • 1 x GigE OUT (Electrical RJ45)
  • Installation Kit: System Core Cables, Mounting Hardware, Documentation, User Manual [# Add Power Supply]

VCL-5052-NKS VCL-5052, Network Isolation Equipment 19-Inch, Rack Mount Version Supports:

  • 1 x 1G/10G IN (Optical)
  • 1 x 1G/10G OUT (Optical) (# Specify Optical Interface Type)
  • Installation Kit: System Core Cables, Mounting Hardware, Documentation, User Manual [# Add Power Supply]

VCL-5054- NKS-10G VCL-5054, Quad Network Isolation Equipment 19-Inch, Rack Mount Version Supports:

  • 4 x 1G/10G IN (Optical / Suitable for SFP/SFP+)
  • 4 x 1G/10G OUT (Optical / Suitable for SFP/SFP+) (# Specify Optical Interface Type)
  • Installation Kit: System Core Cables, Mounting Hardware, Documentation, User Manual [# Add Power Supply]

VCL-5054- NKS-40G VCL-5054, Quad Network Isolation Equipment 19-Inch, Rack Mount Version Supports:

  • 1 x 40G IN (Optical / Suitable for QSFP+ with breakout cable)
  • 1 x 40G OUT (Optical / Suitable for QSFP+ with breakout cable) (# Specify Optical Interface Type)
  • Installation Kit: System Core Cables, Mounting Hardware, Documentation, User Manual [# Add Power Supply]