PT7860A

PT7860A is a MPLS-TP & CE2.0  Packet Transport Network multiplexer with synchronization and TDM SDH/PDH Circuit Emulation Services 

PT7860A MPLS-TP CE2.0

PT7860A provides PTN MPLS-TP and CE2.0 communications (EPL, EVPL, EPLAN, EVC) with PDH and SDH Circuit Emulation Services according to SAT over IP, CES over IP, TDM over IP et TDM over MPLS standards.

PT7860A has a switching capacity of 85 Gbps. It delivers 6x 10GE interfaces and 4x GE SFP ports as well as 8 or 16 E1 interfaces. It has 2x modular slots to host Ethernet, E1 or SDH cards.

PT7860A enables PDH/SDH network migration to latest PTN MPLS-TP and Carrier Ethernet technologies and it helps cost effective and flexible bandwidth upgrade to 10 Gigabit.

PT7860A ensures high availability required by operators and service providers thanks to its redundant architecture and its circuit protection features with lower than 50 ms recovery delay over MPLS-TP and CE2.0 connectins.

PT7860A is desinged in a compact 1U/19'' chassis with an extended -20 to +65 °C operating temperature range.



3G/4G/5G Mobile Networks
  • Mobile Backhaul access with MEF Carrier Ethernet CE2.0
  • PTP 1588 v2 and SyncE Synchronization 
  • E1 Circuit Emulation Services 
PDH / SDH Network migration and upscale
  • Packet Transport Network with end-to-end circuit MPLS-TP and CE2.0
  • Circuit protection
  • Multiple E1 and STM-1/4 interfaces to connect existing DACS / multiplexers
  • Bandwidth upscale to 10GE 
  • Diversity of PDH/SDH and Ethernet / IP traffics
Multiservice traffic aggregation
  • Gigabit traffic aggregation into 1 to 6 10GE interfaces
  • Multiservice traffic - IP, MPLS, CE2.0, SDH
MPLS-TP
  • Any Ethernet port can be configured as NNI (MPLS port) or UNI (Ethernet service port)
  • Bi-directional LSP
  • Static LSP/PW provisioning via NMS
  • Ethernet (VPWS, VPLS, H-VPLS) and TDM (CESoPSN, CEP, and SAToP) services
  • MPLS-TP OAM and QoS
  • Protection : LSP 1+1/1:1, LSP E2E protection switching < 50ms, based on TP OAM for fault detection
Carrier Ethernet
  • L2 Switching/Bridging
  • STP, RSTP, MSTP
  • Port based VLAN and port isolation
  • VLAN Stacking (Q-in-Q)
  • CE OAM
    • CFM: Ethernet Service OAM (802.1ag/Y1731)
    • EFM: Ethernet Link OAM (802.3ah)
  • Flow Control
  • Link Aggregation Control Protocol (LACP)
  • ERPS G.8032 & ELPS G.8031
TDM
  • Circuit Emulation
    • Fractional E1/T1 (64K timeslots): CES PW
    • Unframed E1/T1: SAToP PW
    • VCn/TU-n/VT-n/STS-n: CEP PW
  • PDH Timing recovery: ACR/DCR/System
  • SDH Circuit Emulation over Packet (CEP)
  • Encapsulation: PW/LSP (TDM over MPLS-TP), MEF 8 (TDM over Ethernet), TDM over IP
Synchronization
  • PTP 1588 v2 : Ordinary/Boundary/Transparent
  • SyncE, ITU-T ESMC
Environment
  • Format : 1U / 19''
  • Temperature : -20 to +65 °C

PT7860A-8TE1-BASE       base chassis with 6x 10GE SFP+ ports, 4x SFP GE and 8x E1/T1 interfaces 

PT7860A-16TE1-BASE     base chassis with 6x 10GE SFP+ ports, 4x SFP GE and 16x E1/T1 interfaces

PT7860A-PW48                 48 Vdc power supply card, 1 or 2 redundant cards per chassis

PT7860A-8TGX                  8x Gigabit Ethernet card, 10/100/1000BT

PT7860A-8USF                  8x Ethernet SFP card,  Fast / Gigabit Ethernet

PT7860A-8GPX                  8x Gigabit Ethernet card, 10/100/1000BT avec POE+

PT7860A-32E1                   32x E1 G704 interface card

PT7860A-STM1/4              2x STM-1 or 1x STM-4 interface card