VDP2-2TGX
The VDP2-2TGX is an end to end solution using the G.993.2 VDSL2 standard technology.
It provides up to 160Mbps symmetric using only a single copper wire pair.
Designed specifically or a LAN to LAN extension and supporting both symmetrical transmission at up to 160/160Mbps within 300 meters, this is a perfect solution to extend LAN to buildings, hotels, hospitals or any location outside of the 100 meters reach of Ethernet UTP.
-
Cost effective bridge function to connect two 10/100/1000 Base-T
-
100/100Mbps up to 300m (980ft) & 5/1 Mbps up to 3km (9842ft)
-
Fully compatible with VDP2-2TTX / VDP2-I-4TTX
-
Selectable CO and CPE mode via DIP switch
-
Selectable 8 bands mode
-
Selectable SNTM Level
-
Selectable G.INP
-
Compact size and DIN rail support
-
Support Wall-mounted & DIN rail installing
| LAN Interface | Complies with IEEE 802.3 10 Base-T, 802.3u 100 Base-T and 802.3ab 1000 Base-T Connector: 2 * RJ45 10/100/1000Mbps MTU: 2000 Bytes |
| VDSL 2 Interface | Complies with ITU-T G993.2 Connector: RJ11/Terminal block DMT Encoding / PTM Transmission On-board surge protector |
| 4-position DIP Switch | Selectable CO / CPE mode Selectable Band plan Selectable target SNR Margin Selectable INP / interleave mode |
| Indicators | LAN: Act/Link, Power VDSL2: Act/Link, Line Mode: CO/CPE |
| Power | DC 12V/1A switching adapter |
| Power consumption |
5W |
| Dimensions |
95 * 110 * 27 mm (3.74’’ * 4.33’’ * 1.06’’) |
| Weight |
0.34 Kg |
| Temperature | 0°~ 50° C (Operating), -20°~70°C (Storage) |
| Humidity |
10—90% non-condensing |
| Certification |
CE, FCC, RoHS Compliant |
| VDP2-2TGX | VDSL2 PTM modem 2 wire, 100/100Mbps at 300m , 5/1 at 3km, selection as CO/CPE or master/slave per DIP switch, 2 x 10/100/1000BT ports, VLAN transparent. Supply with AC/DC 12v 1A adapter |
