SFP-VDSL2-SP-TELCO

SFP-VDSL2-SP-TELCO is a VDSL in SFP format. The SFP turns the VDSL Telco signal into an Ethernet connection like an optical SFP does.

 

The SFP-VDSL2-SP-TELCO modem is backward compatible with ADSL2plus.


Key advantages

Simple, future-proof solution: Upgrade existing gateways with this easy-to-install SFP module. There is no need to replace entire CPE devices, saving time, money, and resources.
Universal compatibility: Works seamlessly with all existing broadband network services thanks to compliance with ITU-T G.993.2, G.994.1, and G.997.1 standards.
Unleash the power of VDSL2: Supports all VDSL2 profiles defined by ITU-T G.993.2, ensuring maximum performance for the network.
Ready for the future: Equipped with the latest ITU standards like G.INP (G.998.4).
Hot plug-in: Network (dis)connection can be made without interrupting or resetting the connected routers or switches.


Benefits for Telcom Operators

Reduced costs: Limits CAPEX and OPEX by eliminating the need to replace entire CPE devices.
Unmatched flexibility: Integrates seamlessly with SFP-equipped networking devices.
Simplified Inventory Management: Eliminates the need for multiple CPE devices, streamlining warehouse operations.
Investment Protection: Future- proofs the network with advanced technology.
Customer satisfaction: Delivers instantly higher connection speed to a wider subscription base.



Typical application 

 

Key features:

  • Modes de transmission VDSL2 : ITU-T G.993.2 Amd.1-7, G.993.2 Annex A & B, G.993.5, G.994.1, G.997.1
  • profils VDSL2 : 8a, 8b, 8c, 8d, 12a, 12b, 17a, 30a
  • Prise en charge ADSL2plus (option) : G.992.3 Annex A & L, G.992.5 Annex A
  • Fonctionnalités avancées de l'UIT :
    • G.INP described by ITU
    • Dual latency: Supported
    • OLR: Supports bit swapping, SRA, SoS, and Dynamic Interleaver Depth change
    • US0: Supported
    • PBO:  Both UPBO and DPBO supported

Hardware:

  • RJ-45
  • SERDES connector to host
  • LED 1 (CO/ CPE indicator)
  • LED 2 (PWR/ Link Status indicator)

Software:

  • Self-Boot & Managed by Internal Flash
  • Linux driver for managed devices
  • System setting via the EBM program

Power: 3.3V, 700mA

Environmental

  • Operating Temperature : -20 ~ +75°C
  • Storage Temperature : -40 ~ +85°C
  • Operating Humidity : 5% to 90% (non-condensed)
  • Storage Humidity : 5% to 95% (non-condensed)
  • ESD Standards : Contact +/-4KV | Air:+/-8KV (EN 61000-4-2)
  • Radiated RFI Standards Strength : 10V/m (EN 61000-4-3)
  • EFT/BURST Standards Power : 2KV Signal: 1KV (EN 61000-4-4)
  • Surge Immunity Standards Power : 2KV Signal:1KV (EN 61000-4-5)

Certification CE / FCC

Ordering information:

 

Part #

Description

SFP-VDSL2-SP-TELCO

Gigabit SFP with VDSL2 modem, mode CPE to connect to carrier DSLAM, ITU-T G.993.2/994.1/997.1/998.4/993.5, adaptative in speed up to 300 Mbps, power consumption 2.3 W, operating temperature range -20 to +75 °C